RGS SL 1000i
RGS SL 1000 Operator Unit

RGS SL1000 Brochure

RGS SL1000 Manual

Installation Instructions

SL-1000 Dimensions

SL-1000 Install Profile

SL-1000 V-track Install Profile


Class Designation
ETL listed for UL325 compliance
Residential and commercial gates

Operator Dimensions

Commercial & Industrial
•   Operator: 26”H x 8” diameter
•   Control Box: 18” H x 18”W x 6”

•   Operator: 12” H x 8” diameter
•   Control Box: 15”h x 13w x 6


•   25 ft. Length, 1000 lbs. continuous duty

•   45 ft. length, 2000 lbs., continuous duty


•   Manufactured in Pensacola FL USA
•   Durable, powder coated aluminum parts will not rust
•   Manufactured in Pensacola FL USA

RGS SL 1000i

View larger image of the SL1000 Slide Gate Operator

RGS SL –1000 Commercial Slide Gate Operator

RGS Operators mount directly to the support post and allow for installation where pad mounted or chain driven operators are not desirable or practical.

Three power levels are available for residential, commercial and industrial applications. Self contained operators are designed for quiet operation and to be maintenance free.

RGS operators will work with CURVED gates and in harsh winter climates. Features the Linear/Osco APeX Controller.

Operator Features

•   Gates up to 25’ in length and 1000 lbs.
•   24 VDC operation with built in battery backup
•   High Torque 24 VDC planetary gearmotor drive with 3 times the torque of the SL-1000
•   Double sealed upper and lower bearings
•   UHMW Nylon rack gear attaches to gate (eliminates rusting and stretching of chain)
•   All aircraft grade machined aluminum components (no castings)
•   All stainless steel fasteners
•   Locking Upper Cap conceals easy to use Manual Release
•   Standard Holding Brake prevents gate from being forced open


•   Full systems capable controller
•   Soft start/stop
•   Reversing IRD Sensor
•   Secondary safety input
•   Multiple opening options on power outage
•   Convenient on/off switch
•   No adjustments needed for years of trouble free service
•   Hi-Torque permanent magnet DC motor


•   Battery backup standard
•   Direct drive 61:1 gear reduction
•   Emergency release - easily disengages from rack gear on gate
•   Gate opening/closing speed approximately one ft per second


•   120 VAC, 60 Hz, 20 Amps
•   ¾ HP equivalent torque DC motor for Commercial and Residential
•   1 HP equivalent torque DC motor for Industrial
•   Inherent battery backup
•   Prewired weatherproof control box with knockouts